HALOT-X1 Resin 3D Printer for Miniatures
90% of users also grabbed these add-ons!
HALOT-X1 Standard & Combo: Expected to ship at the end of September.
Column
Enhanced Stability and Precision
Tired of print failures caused by shaking or misalignment? With HALOT-X1’s innovative top-down motion system, the resin vat and light source move while the build plate stays still—unlike traditional printers. Dual linear rails and lead screws stabilize every layer. That means smoother prints and fewer surprises.
True Leveling-Free
Say goodbye to time-consuming leveling calibration. HALOT-X1 arrives pre-leveled with a innovative build plate—no calibration needed. Just unpack, load resin, and start printing.
92 Light Zones Intelligent Exposure
The HALOT-X1 uses 92-zone Intelligent Exposure to activate light only where it’s needed. This saves energy, boosts accuracy, and extends your screen’s life—so your prints stay consistent and your equipment lasts longer.
Quick-Release Build Plate
Removing delicate prints without damage can be stressful. HALOT-X1’s quick-release build plate makes it simple—just twist the handles and harvest your prints with ease. No scraping, no broken parts—just clean, safe removal every time.
Faster Printing Speed
Waiting hours for a single model to finish can slow down your workflow and creativity. HALOT-X1 supports a blazing-fast maximum print speed of 170mm/h. Whether you're iterating prototypes or delivering batch production, you'll print more in less time—without sacrificing quality.
Resin RFID Chip Recognition
Manually configuration print settings for each resin type is tedious and error-prone. With HALOT-X1, each official resin bottle includes an RFID tag automatically read by the machine. It instantly loads the ideal print parameters from the cloud, giving you optimal results without hassle.
Passive Chamber Thermal Circulation
Efficient Passive Heat Circulation
Maintains stable internal temperature without fans or heaters.
Reduces curing issues, warping, and print failures silently and efficiently.
CHITUBOX Pro
Model prep shouldn’t slow you down. That’s why HALOT-X1 includes a 3-month CHITUBOX Pro subscription (a \$42 value). Known for its power and ease of use, CHITUBOX Pro helps you slice faster and smarter—whether you’re a beginner or a seasoned maker.
Handy Resin VAT Latch
VAT maintenance shouldn't be a hassle. With a simple swing-to-lock mechanism, HALOT-X1 makes it easy to clean and swap vats. Plus, the upgraded NACF release film lasts longer, handles higher temps, and peels smoother—so you print more with less dow.
FAQs
Q: I’m new to PioCreat Studio for the HALOT X1 3D printer for beginners. Is there a tutorial available?
A: Yes. Please check our official PioCreat Studio Tutorial. It provides detailed guidance on installation, slicing settings, and workflow for the HALOT X1, helping 3D printer beginners get started quickly.
Q: The “Door security” reminder pop-up is annoying, and I have to close the lid before the build plate can move down.
A: This feature is designed for safety, especially when using a resin 3d printer. We do not recommend disabling it. The cover needs to be closed to unlock the platform.
However, if the sensor is faulty or you need to disable the function, you can manually turn it off by navigating to [Settings]-[Print Settings]-[Door Security Reminder].
Q: The resin tank lifting and lowering speed seems too slow.
A:The motor speed for both lifting and lowering in a resin printer 3d is configured in the system as an “S-curve” motion profile: slow speed at the “home position” and the “highest point,” with acceleration in between.
Q: The light intensity is not adjustable. The default intensity of 6500 μW/cm² is too high, which may cause compatibility issues with third-party resins and reduce print accuracy. While other 16k resin printer models allow light power adjustment.
A: We aim to reduce the operational difficulty for beginners, so this parameter is currently not user-adjustable. We recommend using official resins to avoid compatibility issues during resin 3d printing.
Q: Which sensors are built into the printer, and where are they located?
A: The built-in sensors are as follows:
- Proximity switch — Located at the top for lid opening detection.
- Limit switch — For Z-axis motion control.
Q: How do I import a resin parameter pack?
A: Connect to Creality Cloud. Once the connection is complete, the parameter pack for your 3d resin printer will be imported automatically.
Alternatively, import the parameter pack manually via USB drive.
Q: My USB drive transfers files very slowly. How can I speed it up?
A: We recommend using a USB 3.2 flash drive for faster transfer to your resin 3D printer.
Q: How can I delete files stored in the printer?
A: You cannot directly delete historical resin 3d prints stored on the device. However, importing a new file will overwrite the one stored on the mainboard.
Q: What UV wavelength is the HALOT-X1 compatible with?
A: It is designed for 405 nm UV resin, which is standard for most resin printers for miniatures and resin printers for figurines, ensuring high detail and accuracy in your resin 3d prints.
| Parameter | Value |
|---|---|
| Machine size | 344mm*331mm*434mm |
| Printing size | 211.68mm*118.37mm*200mm |
| Package Size | 430mm*420mm*535mm |
| N.W. | 12.93KG |
| G.W. | 16.19KG |
| Printing Technology | LCD |
| Light Source | Honeycomb Matrix Light Source |
| Exposure Intensity | 6500±10%μW/c㎡ |
| Resolution | 16K(15120*6230PX) |
| Pixel Size | 14*19μm |
| Z-Axis Accuracy | 0.01mm |
| Layer Thickness | 0.01~0.2mm |
| Printing Speed | Max. 170mm/h |
| Touch Screen | 3.98-Inch Capacitive Touch Screen |
| Slicing Software | HALOT BOX/Chitu Box |
| Data Transmission | USB/WIFI |
| Input Voltage | 100-120V~200-240V, 50-60Hz |
| Power | 350W |
